The Pressure Compensated Adaptor (PC Adaptor) is a highly efficient irrigation accessory designed to optimize water flow and improve the stability of irrigation systems. Using advanced pressure compensation technology, the adapter automatically adjusts water flow under varying water pressure conditions, ensuring a consistent water supply at all points of the irrigation system and avoiding uneven irrigation caused by fluctuations in water pressure.
Typically manufactured from corrosion-resistant, high-strength materials, these adapters offer excellent durability and UV resistance, making them suitable for use in a wide range of environments and climates. They are designed for quick and easy installation and can be easily connected to existing irrigation systems. Pressure-compensated adapters not only improve the efficiency of water utilization, but also effectively extend the life of the irrigation system, providing an ideal solution for modern agriculture and horticulture.
| A | B | |
| Pressure: | 2-3Bar | 2-3Bar |
| Flux: | 48 L/H | 60 L/H |
To winterize impact sprinklers, you need to shut off the water supply, drain all residual water from the lines and sprinkler heads, blow out remaining moisture using a compressed air method, and protect exposed componen...
READ MOREFor most impact sprinklers, you need to run them for approximately 1.5 to 4 hours to deliver 1 inch of water, depending on the nozzle size, operating pressure, and the area each head covers. A standard residential impac...
READ MOREImpact sprinklers stick primarily because of debris buildup, worn or swollen seals, mineral deposits from hard water, and mechanical wear on the pivot arm spring or bearing. When the rotating head stops spinning or gets...
READ MOREThe Bottom Line: Estimated Water Volume in 20 Minutes Running a standard residential impact sprinkler for 20 minutes typically consumes between 60 and 100 gallons of water. This estimate is based on an average flow rate...
READ MORE