The 50cm ground stake sprinkler is a medium-length ground stake sprinkler for the irrigation of medium-sized plants and lawns. The upper part of the sprinkler has a spraying device to cover a large area, while the lower part of the ground stake is used to fix the equipment so that it is stable and does not move easily. The angle of the nozzle can be adjusted to ensure that the water flow covers an even area and meets the growth needs of different plants.
The support part is made of corrosion-resistant material and can be used in a wide range of soil and climate conditions. The user simply inserts the ground plug into the soil to ensure that the sprinkler head works steadily, making it ideal for irrigation in home gardens, commercial planting and landscaping projects.
To winterize impact sprinklers, you need to shut off the water supply, drain all residual water from the lines and sprinkler heads, blow out remaining moisture using a compressed air method, and protect exposed componen...
READ MOREFor most impact sprinklers, you need to run them for approximately 1.5 to 4 hours to deliver 1 inch of water, depending on the nozzle size, operating pressure, and the area each head covers. A standard residential impac...
READ MOREImpact sprinklers stick primarily because of debris buildup, worn or swollen seals, mineral deposits from hard water, and mechanical wear on the pivot arm spring or bearing. When the rotating head stops spinning or gets...
READ MOREThe Bottom Line: Estimated Water Volume in 20 Minutes Running a standard residential impact sprinkler for 20 minutes typically consumes between 60 and 100 gallons of water. This estimate is based on an average flow rate...
READ MORE